How to measure lug width
The quickest way is to look up your watch in the index: we list the lug width for every reference, taken from the manufacturer's specifications and cross-checked. If your watch is not listed, or you want to confirm it, measuring takes a minute.
- Step 1: Use calipers if you can. A cheap digital or plastic caliper is far more accurate than a ruler. A ruler with millimeter marks works in a pinch, but it is easy to be off by a millimeter.
- Step 2: Measure between the inside faces of the lugs. Turn the watch over and measure straight across, at the point where the spring bar sits. Do not measure the outside of the lugs or the strap.
- Step 3: Round to the nearest whole millimeter. Most watches use whole sizes. A reading of 19.8 mm is a 20 mm watch.
- Step 4: Double-check with the original strap. Many straps have the width printed on the underside near the lugs, often with the taper (for example "20-18"). Measuring the strap end can help, but only if the strap is the right size to begin with.
Typical lug widths by watch type
- Small and women's watches: usually 12 to 18 mm.
- Dress watches: usually 18 to 20 mm.
- Dive, sports and field watches: usually 20 or 22 mm, the two most common sizes overall.
- Large and oversized watches: 24 mm and up.
Some brands use odd sizes, such as 19 mm or 21 mm, on certain references. Always check your exact model rather than assuming an even width.
What if the strap is the wrong width?
A strap that is too narrow slides along the spring bar and leaves visible gaps at the lugs. A strap that is too wide will not fit between the lugs, or will bunch and press on the case. On a 21 mm watch, a 20 mm strap is a common compromise, but the gap usually shows. A strap made in the correct width always looks and wears better.
Strap taper explained
Most leather, rubber and sailcloth straps taper: they are wider at the lugs than at the buckle. A strap listed as 20/16 is 20 mm at the lugs and 16 mm at the buckle. Only the first number has to match your watch. The second changes the look (a stronger taper is dressier) and decides which buckle fits. NATO and perlon straps usually do not taper.
Straight end vs curved end
Lug width tells you which straight-end straps fit. Curved-end or fitted straps are shaped for a specific case as well, so they only fit the references they are made for, even between watches with the same lug width.
Proprietary and integrated straps
Some watches do not use a standard lug width at all: smartwatches with their own connectors, watches with integrated bracelets, and some models with brand-specific quick-change systems. For these, buy straps made specifically for that watch, or the right adapters.